Em 0006

IBM 2109-S08, 8 Porturi Fibra, Management serial si RJ-45, 2 Surse redundante

IBM 2109-S08, 8 Porturi Fibra, Management serial si RJ-45, 2 Surse redundante

Double click on above image to view full picture

Departeaza
Apropie

Mai multe poze

Disponibilitate: In stoc

 

Cod produs: RET742

179 RON
 (TVA inclus)
   
   

Prezentare

General: Fibre-channel protocol American National Standards Institute (ANSI) fibre-channel ANSI Standard (FC-PH) F...

Informatii produs

General - Fibre-channel protocol American National Standards Institute (ANSI)
- fibre-channel ANSI Standard (FC-PH)
- Fabric initialization Complies with FC-SW 3.2
- Internet protocol (IP) overfibre-channel (FC-IP)
- Complies with 2.3 of the FCA profile
- System architecture: Nonblocking shared-memory switch
- System processor: Superscalar 33-Mhz Intel i960RP
- Number of fibre-channel ports: x8
- Fibre-channel port speed: 1.0625 GBps full duplex
- Aggregate switch input/output (I/O) bandwidth: 8 GBps, full duplex
- Frame buffers: 16 buffers per port at 2112 bytes per frame
- Fabric latency: <2 μs with no contention
- Data transmission range: Up to 500 m (1640 ft) for short wavelength optical link, Up to 10 km (32 808 ft) for long wavelength optical link
- Chassis types: Back-to-front airflow (power supply out front)
Specificatii tehnice - Fabric management Simple name server, alias server, simple network management protocol (SNMP), Telnet, World Wide Web
- User interface RJ-45 front panel connector for 10BASE-T or 100BASE-T Ethernet or in-band
- Serial port Local front panel RS-232 port for recovering factory settings
Optical port specifications - Fibre-channel interfaces of a 2109 Model S08 Switch system equipped with an optical port interface uses a short wavelength (780 to 850 nm) or long wavelength
- (1270 to 1350 nm) laser transmitter.
- The laser complies with 21 CFR(J) class 1
- laser safety requirements. It uses non-open fibre control (OFC) optical GBICs in the
- switch circuit. Limiting the optical power emitted by the port guarantees safe class 1
- operation, thereby eliminating the need for physical shutters.
- The optical GBIC uses the duplex-session control (SC) connector scheme.
Rack-mount dimensiuni
- v 1U, 483 mm (19 in.) rack mount Electronic Industries Association (EIA)
- compliant.
- v Height: 43.4 mm (1.71 in.), Width: 428.6 mm (16.88 in.), Depth: 450.0 mm (17.72
- in.)
Tabletop dimensiuni: v H: 43.4 mm (1.86 in.), W: 428.6 mm (16.88 in.), D: 450.0 mm (17.72 in.)
Greutate 7.73 kg (17 pounds)
Surse alimentare:
Putere totala 110 W
Input 85 - 265 V ac
Input line frequency 47 - 63 Hz.
Inrush current 10 A peak, >300 μs for a hot or cold start
Harmonic distortion Active power factor correction per IEC1000-3-2
Input line protection Fused in both hot and neutral lines
Maximum dimensions Width: 89 mm (3.5 in.) Height: 38 mm (1.5 in.) Length: 279mm (11 in.)
Redundancy Dual supplies, Hot pluggable
BTU rating 110 W x 3.412 BTU per hr per W = 375 BTU per hr

Etichete produs

Foloseste spatii intre etichete. Foloseste ghilimele simple (') pentru fraze.

 
SEO